Simple Low Impedance Microphone Amplifier Project

This is a Simple Low Impedance Microphone Amplifier Project. The circuit is a microphone amplifier for use with low impedance (~200 ohm) microphones. It will work with stabilized voltages between 6-30VDC. If you don't build the impedance adapter part with T1, you get a micamp for higher impedance microphones. In this case, you should directly connect the signal to C7.

Low Impedance Microphone Amplifier Circuit Diagram

http://www.circuitsproject.com/2014/01/simple-low-impedance-microphone.html
Parts List

  • R1=15k
  • R2= 150k
  • R3= 2k2
  • R4= 820
  • R6= 10k
  • R7= 10k
  • P1= 1M
  • C1= 3k9
  • C2= 100u
  • C3= 22u
  • C4= 4u7
  • C5= 470u
  • C6= 10u
  • C7= 100n
  • C8= 47u UNIPOLAR
  • D1= 1N4148
  • U1= TL081
  • CN1= SIL6